Why a video card doesn’t mine much

You can change the GPU settings in the AMD Adrenalin program. The instructions are as follows:

1. Launch the software.
2. Click on the gear in the upper right corner of the interface.
3. Open the Graphics section and click Advanced.
4. Set Compute mode in the GPU Workload tab.
5. Restart the computer.

After performing these steps, the GPU will start working in compute mode. Please note that this may increase power consumption and hardware temperature.

AMD drivers are not patched

This is another reason why the device may not mine much. Mining cryptocurrencies on AMD requires installing special drivers optimized to work with certain algorithms. This will help to maximize the performance of the hardware.

1

ByBit

5020 $
бонус для нових користувачів!

9.8

ВІЗИТ Читати відгук

ByBit забезпечує зручні та безпечні умови для торгівлі криптовалютою, пропонує низькі комісії, високий рівень ліквідності та сучасні інструменти для аналізу ринку. Він підтримує спотову торгівлю та торгівлю з використанням кредитного плеча, а також допомагає початківцям та професійним трейдерам за допомогою інтуїтивно зрозумілого інтерфейсу та навчальних посібників.

2

Binance

Заробіть 100 бонусів $

для нових користувачів!

9.5

ВІЗИТ Читати відгук

Найбільша криптобіржа, де можна швидко та безпечно розпочати свою подорож у світі криптовалют. Платформа пропонує сотні популярних активів, низькі комісії та передові інструменти для торгівлі та інвестування. Проста реєстрація, висока швидкість транзакцій та надійний захист коштів роблять Binance чудовим вибором для трейдерів будь-якого рівня!

Download drivers only from official websites.

For patching you will need third-party software – for example, Pixel Patcher, AMD Blockchain Driver or AMD Memory Tweak Tool. Instructions for ATI Pixel Clock Patcher utility:

1. Download the program from the official website.
2. Unzip the archive.
3. Run the file atikmdag-patcher.exe with administrator rights and follow the installer’s instructions.
4. The software will start checking the drivers. It is necessary to load the proposed ones.
5. Restart the computer.

It is important to remember that installing patched drivers can have a negative impact on the stability of the system and equipment. It is recommended to perform this operation only if you have the necessary knowledge and skills.

Other reasons

The graphics card may not mine much due to insufficient cooling. Overheating is a common problem. If the GPU is running at a high temperature, its performance will decrease.

Overheating occurs when the device is running repetitive tasks too intensively. This is easy to notice – the fans will spin faster and make noise.

There are three reasons why a GPU can overheat. These include:

• Poor ventilation. You will need to replace the standard coolers with more powerful ones or add additional ones. This will help increase airflow inside the computer and improve circulation around the graphics card.
• Dust accumulation. The components of the system need to be cleaned. This can be done with a can of compressed air or a brush.
• Old thermal paste. It is recommended to replace it every year and a half.

Weak performance of the graphics processor can have other causes. The following are distinguished:

• Insufficient power supply. Each graphics card has certain requirements for the power supply. If you use a high-performance GPU, you may need a more powerful PSU. You need to make sure that the GPU is connected properly and is receiving the required power.
• Complexity of mining. If this indicator is very high, then even powerful equipment will produce a low hash rate. You can check the complexity of the network on special sites (for example, Minerstat).
• Excessive overclocking. Miners often change the configuration of the equipment to set it up for maximum performance. However, overclocking creates new problems in the system. This can cause the GPU to fail soon. The editorial staff has developed a detailed instruction on overclocking a video card. It will help to carry out the procedure without the risk of damaging the hardware.
• Viruses. Malicious programs can get on the computer from emails, when going to questionable sites, while downloading applications. If the PC is infected, it affects the performance of all components. It is necessary to install an antivirus and check your computer for harmful programs.

How to fix the low speed of cryptocurrency mining

For market participants, mining digital assets has become one of the most profitable investment strategies. To improve the mining speed, you need to:

1. Check the settings of the coin mining software.
2. Update GPU drivers. Old or incompatible software can lead to low hardware power.
3. Clean the system from unnecessary files and applications that can negatively affect performance.
4. Check the “hardware” and check for faults in the GPU or other components.
5. If the power supply does not cope with the load, put a more powerful one.
6. Clean the equipment, replace the thermal paste.

What factors affect the hash rate in mining

Extraction of cryptocurrencies is a process that requires high-performance equipment. The main indicator in mining is the hash rate of the device. This is the speed of computational operations, which affects the profitability. The hash rate depends on several factors. See the table for more details.

Поширені запитання