How much can be mined on a single graphics card in 2024

Such power distinguishes GeForce RTX 3090 among competitors, but it leads to significant power consumption and increased costs for it. The card also has a large and efficient cooler, ensuring quiet operation even at 100% speed.

Hashrate table for mining algorithms based on current data from the WhatToMine website.

The table below shows the approximate values of returns per day. You can also see which coin is the most profitable.

These figures do not take into account the cost of electricity. If you consider its cost in Moscow, the profitability will be only on the coin NIM. For 24 hours it will bring $0.01 net profit.

1

ByBit

5020 $
bonus za nove uporabnike!

9.8

OBIŠČITE SPLETNO STRAN Preberi pregled

ByBit zagotavlja priročne in varne pogoje za trgovanje s kriptovalutami, ponuja nizke provizije, visoko stopnjo likvidnosti in sodobna orodja za analizo trga. Podpira promptno trgovanje in trgovanje s finančnim vzvodom, začetnikom in profesionalnim trgovcem pa pomaga z intuitivnim vmesnikom in učnimi navodili.

2

Binance

Zaslužite bonus 100 $

za nove uporabnike!

9.5

OBIŠČITE SPLETNO STRAN Preberi pregled

Največja borza kriptovalut, kjer lahko hitro in varno začnete svojo pot v svet kriptovalut. Platforma ponuja na stotine priljubljenih sredstev, nizke provizije ter napredna orodja za trgovanje in investiranje. Zaradi preproste registracije, visoke hitrosti transakcij in zanesljive zaščite sredstev je Binance odlična izbira za trgovce na vseh ravneh!

Instructions for overclocking video cards

Overclocking is a change in the basic settings of the graphics processor to increase the speed of computations and reduce power consumption.

The following programs will be required to do this:

• GPU-Z – to view the indicators.
• MSI Afterburner – for overclocking.
• Furmark – for performance testing.

MSI Afterburner allows you to track changes in real time. You will need two parameters:

• Ura jedra – core frequency.
• Ura pomnilnika – memory frequency.

Overclocking the graphics card can void the warranty.

The overclocking instructions are as follows:

1. The first thing to do is to test the graphics card with basic settings (+0 Core Clock / +0 Memory Clock) and record the data. It is better to change the values separately from each other. After each update you need to test.
2. Some models may have a high temperature rise. For example, GeForce RTX 3090 is prone to memory overheating. Maximizing fan speed will reduce the probability of possible damage.
3. In Core Clock, add 20-30 Mhz each up to the highest hash rate.
4. In the FurMark program, run a stress test. If an error appears, you should go back to the previous step and increase by a smaller amount of Mhz.
5. The same goes for Memory Clock. It is necessary to gradually make the frequency higher by 50 or 100 up to the maximum hashing speed. It is necessary to start from 0.
6. After adjusting the core and memory frequency, you can reduce power consumption. To do this, you just need to gradually make the power lower by 10% until a suitable value.
7. Overclocking the graphics processor can lead to malfunctions, so it is worth testing for a few days. If there are signs of instability, it is better to put the basic parameters and run the card again. The process can be repeated until the best settings are found.