To join the pool, the ASIC owner needs to create a settings configuration by specifying the IP of the miner. If it is unknown, it can be easily found out. To do this, you need to download IP Reporter Antminer. In the article we will tell you how to work with the program.
What IP Reporter Antminer is needed for
This is the official software of the Bitmain company. The only function of IP Reporter is to scan IP ports for ASIC miners. Other services can handle network address determination:
Free IP Scanner.
10-Strike Software(10-Strike: Network Scanning).
Angry IP Scanner.
Nevertheless, IP Reporter Antminer is recommended for use when setting up ASICs. It is important to keep in mind that the search is possible on a personal computer and miner with Windows operating system installed.
The table below shows how to determine the network address in other operating systems.
How to connect and configure the program
Before searching for IP, make sure that the power supply is connected to the ASIC and there is access to the Internet. Then you need to download and install IP Reporter. After launching the utility, the ports are scanned and the miner settings are updated. The following is a step-by-step instruction for each of the items.
Download
Download the IP Reporter program from the official Bitmain website:
ByBit provides convenient and safe conditions for cryptocurrency trading, offers low commissions, high level of liquidity and modern tools for market analysis. It supports spot and leveraged trading, and helps beginners and professional traders with an intuitive interface and tutorials.
The largest crypto exchange where you can quickly and safely start your journey in the world of cryptocurrencies. The platform offers hundreds of popular assets, low commissions and advanced tools for trading and investing. Easy registration, high speed of transactions and reliable protection of funds make Binance a great choice for traders of any level!
Select the Customer support section.
Next, select the Self-Service subsection.
Then select Firmware Download.Self-Service page on Bitmain’s website.
In the left field, select “Others” from the drop-down list.
In the right box, check IP-reporter.
Click the Download button and save the zip file.
Run
Before opening the utility, you need to unzip the archive to a convenient place. After that you need to:
Right-click. Then in the window that appears, select “Run as administrator”.
The program screen will appear. IP Reporter window after startup
The program sets the Shelf, Step and Position fields to 1 at startup. There is no need to change it.
Press the Start button.
Then you need to confirm the transfer of the network address directly from the ASIC miner. To do this, press the IP Report button on the back panel and hold it down until a beep – 5 seconds.
A window with the search result will appear. The window with the found IP address
Copy the IP address.
Press the Stop button.
Confirm the settings
The found IP can be used to enter the web interface of ASIC-miner management. To do this, enter it into the address bar of your browser – Chrome or Firefox. The control panel login window will appear.
The default user name “root” and password “root” are used for initial authorization.
If desired, you can change the password in the Administration tab. It is important to save it in a safe place. Otherwise, access to the miner may be lost. Then you need to click the Save&Apply button. After that, the async will reboot.
The “Miner Configuration” tab in the web panel is necessary for direct connection to the mining service. It is necessary to enter the credentials obtained during registration on the official site of the pool.
Platform address.
Name of the miner.
Password.
Click on the Save&Apply button. Next, the miner will start mining cryptoassets. After a couple of minutes, the statistics of the worker’s work will appear on the pool.
Detecting the IP of multiple devices
If you need to find the network addresses of several devices, the IP Reporter program from Bitmain will also work. Search instructions:
Follow steps 1-8 of the IP search instructions.
Click the Skip button. In this case, after the first address found, scanning of active ports will continue.
Hold down the IP Reporter button on each new ASIC device until it beeps.
The utility will generate a list of addresses of all connected miners.
End the search with the Stop button.
Also, after a successful IP search, the user needs to create a User ID. To do this, you need to perform the following steps:
Open the official Bitmain portal.
Provide an up-to-date e-mail address.
Set a password for the account.
Agree to the terms and conditions on the site.
Add a cell phone number and enter a code to confirm it.
After the procedure, ASIC will once again reboot to save the updated information.
Possible problems
Despite the simplicity of the functionality, users may encounter common difficulties when working with Antminer IP Reporter. For example, the program will not work after unpacking the archive. Also, the utility may start, but the network IP address cannot be found.
The program does not work
Most often the cause can be an active antivirus. In this case, after unzipping, the file is quarantined. To solve this, you need to manually add the utility to the exceptions and restore to the original location.
The program cannot determine the IP
If the search using the IP Reporter utility fails, a window appears with the text “Timeout. Please restart”. The reason may be incorrect settings of the miner. To fix it, you need to roll back the device to the factory firmware (Hard reset).
To do this, hold down the Reset button on the ASIC panel until the equipment starts rebooting. Then you need to repeat the IP search procedure starting from point 1.
ASIC front panel control panel
No Internet connection
There is no need to rush through the Hard reset procedure. The reason may be that the ASIC is not connected to the Internet. You should check the power supply and tightness of the LAN cable connection to the miner’s Ethernet port.
Benefits of IP Reporter Antminer
This scanner is not the only utility for finding IP ports. Convenience compared to alternative services is made up of several options:
Interface simplicity.
The program is suitable for searching both network addresses of one device and several.
It is official software of the manufacturer, which means it is safe for personal computers and does not contain advertising.
It can be downloaded for free.
Frequently Asked Questions
🔥 Can I find out IP without using third-party software?
Information about the addresses of devices in your home network can be found in the router control panel – the “Users” tab. To enter it, you need to enter 192.168.0.1 in the address bar, and then login and password.
⚡ Can I recover a lost password from the ASIC web interface?
It is not possible. The only solution is to roll back the miner to factory settings.
📌 Can I overclock ASIC hardware?
Yes, when using third-party firmware, and also taking into account the modernization of the cooling system – for example, replacement with immersion.
✨ On which other devices can I mine other than ASICs?
Video cards and in rare cases central processing units are also used to mine cryptocurrency.
📢 How can I maximize the life of my ASIC?
Avoid overheating and perform regular service and dust cleaning.
Is there a mistake in the text? Highlight it with mouse and press Ctrl + Enter
Indonesian 
English (United States) 
English (UK) 
Arabic 
Bulgarian 
Hungarian 
Greek 
Danish 
Spanish 
Italian 
Chinese 
Korean 
Latvian 
Lithuanian 
German 
Dutch 
Norwegian 
Polish 
Portuguese (Portugal) 
Portuguese (Brazil) 
Romanian 
Slovak 
Slovenian 
Turkish 
Ukrainian 
Finnish 
French 
Czech 
Swedish 
Estonian 
Japanese